Cupra ATECA 2022 - Page 224

222
Infotainment system
Customise shortcuts
At the bottom of the screen you will nd short-
cuts to customisable system functions. Use the
settings to delete or replace them, or change
their order.
●
Press and hold one of the icons (or press +
of an empty position) to display an additional
window.
●
Select one of the icons from the apps bar.
●
Press to delete an icon.
●
Click on an icon in the additional window to
replace the value.
●
Hold your nger on one of the icons and drag
it to the desired position.
●
To close the edit mode, press in the addi-
tional window, or press .
Settings (system and sound)
The selection of possible settings varies de-
pending on the country, the equipment in
question and the equipment of the vehicle.
Modifying settings
The meaning of the following symbols are valid
for all system and sound settings.
All changes are automatically applied when the
menus are closed.
/
The setting is selected and activa-
ted or connected.
/
The setting is not selected, disa-
bled or disconnected.
To open a drop-down list.
To increase a setting value.
To reduce a setting value.
To go back step by step.
To go forward step by step.
To change a setting value with
the scrollable button without ad-
justing.
Sound settings
●
Access the sound settings: HOME > .
In the sound settings there may be the follow-
ing functions, information and setting options:
●
Equaliser.
●
Position.
●
Settings.
System settings
●
Access the system settings: HOME > .
In the system settings there may be the follow-
ing functions, information and setting options:
●
Screen.
●
Time and date.
●
Language.
●
Additional keypad languages.
●
Units.
●
Voice control.
●
Wi-Fi.
●
Data connection.
●
Manage mobile devices.
●
Reset factory settings.
●
System information.
●
Copyright.
●
Conguration wizard.
Adjust the volume of external audio sources
If you need to increase the playback volume
for the external audio source, rst lower the
volume on the infotainment system.
If the sound from the connected audio source
is very low, increase the output volume on
the external audio source. If this is not enough,
change the input volume to medium or high.
If the sound from the connected external au-
dio source is too loud or distorted, lower the
output volume on the external audio source.
If this is not enough, change the input volume
to medium or low.