Seats and head restraints
Fitting the rear head restraints
To mount the external head restraints, the cor-
responding backrest must be partially folded
forward.
•
Unlock the backrest ››› page 107.
•
Insert the head restraint bars into the guides
until they perceptibly engage. It should not be
possible to remove the head restraint from the
backrest.
•
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on page 108.
WARNING
Remove the rear headrests only when it is
necessary to t a child seat. After removing a
child seat, ret the headrest immediately.
Seat functions
Front centre armrest
Fig. 103 Front centre armrest
To raise the armrest, pull it fully up in the direc-
tion of the arrow ››› Fig. 103 up or step by step
depending on the desired opening.
To lower the armrest, rst lift it to its highest
position. Then lower it down.
WARNING
The front centre armrest may obstruct the
driver's arm movements, which could cause
an accident and severe injuries.
•
Keep the storage compartments of the
centre armrest closed at all times while the
vehicle is in motion.
•
Never let anyone sit on the centre arm-
rest while the vehicle is in motion, not even
a child. This position is incorrect and may
cause severe injuries.
Rear centre armrest
Fig. 104 Folding rear centre armrest
(schematic view).
There might be a folding armrest in the rear
centre seat.
To Next Page
Loading...
