EasyManua.ls Logo

Cupra BORN - Page 134

Cupra BORN
343 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Air conditioningHeating, ventilation and cooling
133
If you are not satised with the temperature
level provided by the system during automatic
regulation, adjust the seat heating manually
and the function will be optimised (Optimis-
ing). The optimisation process will be displayed
in the seats submenu of the infotainment dis-
play.
To reset the process and start the learning
period, go to the submenu Settings > Reset
driver / front passenger prole.
Cases in which the heat seating should not
be switched on
Do not switch the seat heating on if any of the
following conditions are met:
The seat is occupied by a person with limited
perception of pain or temperature ›››
on
page 132.
The seat is not occupied.
The seat has a cover.
A child seat has been installed on the seat.
The seat cushion is wet or damp.
The outdoor or indoor temperature is
greater than +25°C (77°F).
WARNING
People who cannot perceive pain or temper-
ature because of medications, paralysis or
chronic diseases (e.g. diabetes) or have a
limited perception of these, may suer burns
to the back, buttocks or legs when using seat
heating.
People with limited pain and temperature
thresholds must never use seat heating.
If an abnormality in the device's tempera-
ture control is detected, have it checked by a
specialist workshop.
WARNING
If the fabric of the cushion is wet, this can ad-
versely aect the operation of the seat heat-
ing, increasing the risk of burns.
Make sure the seat cushion is dry prior to
using the seat heater.
Do not sit on the seat with clothing that is
wet or damp.
Do not leave clothing that is wet or damp
on the seat.
Do not spill liquids on the seat.
NOTICE
To avoid damaging the heating elements of
the seat heaters, please do not kneel on the
seat or apply sharp pressure to a single point
on the seat cushion or backrest.
Liquids, sharps objects and insulating ma-
terials (e.g. covers or child seats) can damage
the seat heating.
In the event of smells, switch o the seat
heating immediately and have it inspected by
a specialised workshop.
If the original seat upholstery is replaced by
another material, the seat heating may over-
heat or its operation may be limited.
For the sake of the environment
The seat heating should remain on only when
needed.
Otherwise, it is unnecessary energy con-
sumption.
Steering wheel heating
The steering wheel heating only works when
the drive system is switched on.
Steering wheel heating levels
The selected steering wheel heating level will
be displayed on the instrument panel display.
Heating levels are controlled through the info-
tainment system's air conditioning menu:

Other manuals for Cupra BORN

Related product manuals