Cupra BORN - Page 263

Storing objects
262
Luggage compartment oor
Fig. 170 In the luggage compartment:
luggage compartment oor.
The rear of the luggage compartment oor
can be folded forward ››› Fig. 170 . Under-
neath, there is a storage compartment for
items such as on-board tools ››› page 266.
NOTICE
Incorrect use of the luggage compartment
oor can cause damage to it or the luggage
compartment trim.
•
When closing the luggage compartment
oor, always guide it carefully downwards
without dropping it.
•
As far as possible, always spread the load
over the entire surface of the luggage com-
partment to avoid overloading any one spot.
Variable luggage compartment
oor
Fig. 171 In the luggage compartment: open
the second luggage compartment oor.
Fig. 172 In the luggage compartment:
attach the second luggage compartment
oor.
Depending on the equipment, the vehicle may
have a second oor in the luggage compart-
ment.
Opening and closing the second luggage
compartment oor
•
To open it, grasp the handle ››› Fig. 171
1
and fold the rear of the luggage compartment
oor forwards in the direction of the arrow.
•
To close it, fold out the luggage compart-
ment oor and set it down carefully ›››
.
Fixing the second luggage compartment
oor parallel to the rear seat backrest
•
Fold the rear of the luggage compartment
oor forwards.
•
Once folded, lift it up and insert it into the
side brackets, with the open side facing down-
wards ››› Fig. 172 (enlarged image).
Placing the second luggage compartment
oor in a lower position
•
Fold the rear of the luggage compartment
oor forwards.
•
Once folded, pull the luggage compartment
oor backwards along the side guides and put
it in place lower.