EasyManua.ls Logo

Cupra BORN - Page 316

Cupra BORN
343 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MaintenanceVehicle upkeep and cleaning
315
Take special care with...
Headlights/tail lights
Do not clean the headlights/tail lights with a
dry cloth or sponge.
Do not use cleaning products that contain
alcohol. Risk of cracks!
Wheels
Do not use for paint wax or other abrasive
products.
If the protective coating on the paint of the
rim has been damaged due to stone impacts,
scratches, etc., the damage should be repaired
immediately.
Camera lenses
Do not use hot or warm water to remove ice
or snow from the camera lenses. Risk of crack-
ing the lens!
To clean the camera lens, never use abrasive
cleaning products or products with alcohol.
Risk of scratches and cracks!
Windows
Remove snow and ice from windows and ex-
terior mirrors with a plastic scraper only. To
avoid scratches, the scraper should only be
pushed in one direction and not moved to and
fro.
Never remove snow or ice from windows and
rearview mirrors with warm or hot water. Risk of
cracks on the windows!
To prevent damage to the heating of the rear
window, do not put stickers over the heating
elements.
Covers/trims
Do not use cleaning products or chrome
based cleaning agents.
Paint
The vehicle must be free from dirt and dust
before applying wax or care products. Risk of
scratches!
Do not apply wax or care products if the ve-
hicle is exposed to direct sunlight. Risk of dam-
aging the paint job!
The ambient rust deposits must not be re-
moved through friction. Risk of damaging the
paint job!
Remove cosmetic products and sunlight im-
mediately. Risk of damaging the paint job!
Displays/instrument panel
The displays, the instrument panel and the
trim around it must not be cleaned dry. Risk of
scratches!
Make sure that the instrument panel is
switched o and cooled down before cleaning.
Make sure that no liquid leaks between the
instrument panel and the trim. Risk of damage!
Control panels
Make sure that no liquid leaks into the con-
trol panels. Risk of damage!
Seat belts
Do not remove the seat belts to clean them.
Seat belts and their components must never
be cleaned with chemical products, nor should
they be allowed to come into contact with cor-
rosive liquids, solvents or sharp objects. Risk of
damaging the fabric!
If you nd any damage to the belt webbing,
belt ttings, the belt retractor or the buckle,
ask your specialised workshop to replace the
belt in question.
Fabrics/articial leather/microbre
Do not treat articial leather/microbre with
leather cleaning products, solvents, wax polish,
shoe cream, stain removers or similar prod-
ucts.
If the stain is very hard to remove, take the
vehicle to a specialised workshop to have it
removed there. This will prevent damage.
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.

Other manuals for Cupra BORN

Related product manuals