Cupra BORN - Page 315

Maintenance
314
Control panels
Problem Solution
Dirt
Soft brush, then soft
cloth with neutral soap
solution
a)
a)
Neutral soap solution: two tablespoons maximum
in 1 litre of water
Seat belts
Problem Solution
Dirt
Neutral soap solution
a)
,
allowed to dry before
retracting
a)
Neutral soap solution: two tablespoons maximum
in 1 litre of water
Fabrics, articial, Alcantara leather
Problem Solution
Particles of dirt
stuck to surfaces
Vacuum cleaner
Water-based dirt,
e.g. coee, tea,
blood etc.
Absorbent cloth and
neutral soap solution
a)
Problem Solution
Grease-based dirt,
e.g. oil, make-up,
etc.
Apply a neutral soap
solution
a)
. Absorb
the dissolved grease
and paint particles dry-
ing with an absorbent
cloth, in case you must
treat it with water after-
wards
Special dirt, e.g.
pens, nail polish,
dispersion paint,
shoe cream etc.
Special stain remove:
dry with an absorbent
cloth, if applicable, ap-
ply neutral soap solu-
tion afterwards
a)
a)
Neutral soap solution: two tablespoons maximum
in 1 litre of water
Natural leather
Problem Solution
Recent dirt
Cotton cloth with neu-
tral soap solution
a)
Water-based dirt,
e.g. coee, tea,
blood etc.
Recent stains: absorb-
ent cloth
Dry stains: stain re-
mover suitable for
leather
Problem Solution
Grease-based dirt,
e.g. oil, make-up,
etc.
Recent stains: absorb-
ent cloth and suita-
ble stain remover for
leather.
Dry stains: grease sol-
vent spray
Special dirt, e.g.
pens, nail polish,
dispersion paint,
shoe cream etc.
Stain remover suitable
for leather
Care
Apply preservative
cream regularly to pro-
tect from sunlight. Use
a colour preservative if
required
a)
Neutral soap solution: two tablespoons maximum
in 1 litre of water
Carbon bre parts
Problem Solution
Dirt Clean like plastic parts