Cupra BORN - Page 35

Driver information
34
A
B
C
D
E
F
Don't show again
Start
End
Initial conguration wizard
Fig. 32 Schematic diagram: Initial conguration
wizard.
The initial conguration wizard will help you to
set up your Infotainment system the rst time
you switch it on.
Whenever you switch on the infotainment sys-
tem, the initial setup screen will be displayed
››› Fig. 32 if any parameters have not been set
(marked with “ ”) or if the Don't show again
function button has not been pressed.
Function buttons:
Press to set day and time.
Press to search and store to memory the
radio stations that have the best reception
at that moment.
Press to activate “Battery Care Mode”
››› page 75.
Press to link your mobile phone to the In-
fotainment system.
Press to select your home address using
your current position or by manually en-
tering an address.
Press for information on Car2x communi-
cation.
Disables the possibility of
changing the settings of the Infotainment
system. If you wish to perform the initial
conguration, you must access through
Help.
Starts up the Conguration Wizard.
Once one or more settings have been
applied, press to nalise the setup in the
main menu of the wizard.
Closes the Conguration Wizard.