Charging process display
Fig. 74 Behind the battery charging socket
cover: charging process indicator.
Fig. 75 On the inside face of the cover
of the battery charging socket: sticker with
information on the charging process display.
An LED light on the charging socket ››› Fig. 74
(arrow) shows the status of the charging proc-
ess.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
››› Fig. 75.
Charging process displays:
The LED ashes
•
The vehicle has detected the charging con-
nector.
White LED
•
1
Flashing: establishment of communica-
tion between the vehicle and the charging
infrastructure. The charging process is being
prepared.
•
Permanently on: no active charging function
Green LED
•
2
Flashing: the high-voltage battery is
charging.
•
3
Flashing: delayed charging is activated.
The charging process has not yet started.
•
4
Permanently on: the charging process has
completed without any problems.
•
Flashes red: emergency charging at reduced
power due to a failure to recognize the charg-
ing connector.
Red LED
•
Permanently on: there is a fault in the system.
The charging process cannot start or has been
interrupted.
Get specialist assistance if the charging proc-
ess indicator permanently indicates a defect.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation in the ve-
hicle:
On
•
The vehicle has been unlocked.
•
OR: The charging connector has been un-
plugged from the charging socket.
O
•
After unlocking or locking the vehicle, the
lighting switches o automatically after a while.
Charging process indicator lamp
During the charging process, the lamp is
displayed on the instrument cluster screen.
White indicator: connector plugged in, no
charging process active.
Green indicator: connector plugged in,
charging process active.
To Next Page
Loading...
