INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HHCS,M12x1.25,40CL10.9,YZ10-1027731
BOLT,CAR,1/2-13 UNC,1-1/2,GRD8,YZ10-1028722
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006223
WASHER,S-CON,1/2,YZ30-0014934
WASHER,FLAT,1/2,YZ30-0013345
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP1226
1/2" FISHWIRE1_2 FISHWIRE2
7
CABLE TIE 3/16 X 8" 50# UV BLACK
60004328
PASSENGER SIDE FRAME RAIL
EXISTING WELD NUTS
6
2
3
5
7
DRIVER SIDE
FRAME RAIL
ACCESS HOLE (BOTH SIDES)
NOTE: USE THIS
HARDWARE IF
WELDNUT IS NOT
PRESENT
NOTE: USE THIS HARDWARE IF WELDNUT IS PRESENT
1
4
1. Remove plastic underbody panel under rear bumper (if
present) by removing two plastic fasteners with a flat head
screwdriver. Return panel & fasteners to vehicle owner.
2. Remove tape on the side of vehicle frame rails to expose
mounting locations. Trim any exess seam seal (if it will
interfere with hitch).
h
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL)
#45572 (2" BALL)
DESIGNED FOR USE WITH BALL MOUNT #45521
8
To Next Page