curt Echo Mobile - APPLICATION SETUP; Controller Profile Management; Application Profile Creation

CURTMFG.COM
•
NEED ASSISTANCE?
•
87 7.2 87.86 34
•
51180-INS-RF
•
PAGE 4
APPLICATION SETUP ADDING A PROFILE
ACTIVATING A PROFILE
DELETING A PROFILE
After pairing with the Echo
®
, you will be directed to the 'Towing
Profiles' screen to setup your trailer's profile. You can create and
save profiles for multiple vehicles, trailers and load conditions.
Note: Setting configuration is required when trailer conditions change
or the brake controller is being used for a different trailer or vehicle.
Within the 'Towing Profiles' screen, there are
two different profiles menus for you to access.
1. Controller Profile
1. On the 'Controller Profiles' menu, select the empty
'Current Profile' seat at the top of the menu.
2. Name the profile with descriptive information
about the trailer you're towing.
3. Click 'Done' to confirm. You will then be directed to the
'Active Profiles' menu to begin set-up and adjustment.
4. You are also able to modify an existing
trailer name by swiping left on the profile.
5. Repeat steps 1 – 3 for additional trailers
(up to five saved on the device).
1. Click on a profile you would like to activate.
2. Follow the screen prompt by selecting 'Ok'.
3. The profile you selected is now the active 'Current Profile'.
1. In the 'Application Profiles' menu,
select the profile you would like to delete.
2. Swipe left to open menu option.
3. Select 'Delete' to remove.
Create Profile Edit Profiles
• In this menu, you can access the five most recently used settings.
These settings are stored within the Echo device. This option allows
you or others who borrow your Echo to access pre-configured tow
settings quickly and easily.
• Your active profile will display at the top of the menu (1A)
• In this menu, you can create an unlimited number of vehicle trailer
profiles. These profiles are stored within the app on your phone.
1
1A
2
2. Application Profile
To create additional profiles, 6 or more, access the
'Application Profiles' section. This menu will allow you
to create and store and unlimited number of profiles within
the app. Select 'Add Profile' to begin and repeat steps 1 – 3.
swipe