curt Echo Mobile User Manual

PAGE 1
•
51180-INS-RF
•
87 7.2 87.86 34
•
NEED ASSISTANCE?
•
CURTMFG.COM
Read and follow installation manual carefully.
Failure to do so could result in damage to the brake controller unit,
loss of trailer brakes or poor brake performance.
Avoid distracted driving. Only make
adjustments when the vehicle is stationary.
Do not mount the Echo
®
near the exhaust pipe.
Failure to do so may result in heat damage, loss of functionality
and risk of fire.
Prior to driving, test all trailer lights
while the trailer is plugged into the Echo
®
.
• The vehicle must have +12V, ground and turn signals connected to
the 7-way socket. Brake output to the 7-way socket is not required.
• See 'Vehicle-Specific Requirements'.
• An existing aftermarket or factory brake controller will not
function if Echo brake controller is installed.
• No special wiring or connectors are required for use.
• Echo Smart Control IS NOT compatible with Apple CarPlay or
Android Auto. However, it will not interfere with these features.
• Echo is designed to provide a Bluetooth connection, without
obstruction, up to 50 ft. Connection may also be limited by the
Bluetooth signal of your phone.
• The Echo brake controller uses the 7-way connector's +12V
connection to power the brakes, and it shares this power with the
trailer. Ensure the fuse for this connection is rated for 30 amps.
See the vehicle owner's manual to determine the fuse location.
If the LED on the Echo does not light when plugged
into the 7-way connector, the +12V power pin may not
have power from the vehicle. Visit a CURT authorized
installer to install a power wire to the battery.
• If the phone application cannot connect to the Echo due to an incorrect
or missing PIN, contact CURT Product Support. They will need the
serial number located on the label of your Echo brake controller.
• Clean and store the Echo in a safe, dry place when not in use.
We recommend applying dielectric grease to the terminals.
• Requires tow / haul mode activation and / or load detection on
7-way before the +12V output is activated on the 7-way connector.
Activate tow mode and connect trailer before attempting Bluetooth
connection to the Echo. The LED on the Echo must be on.
• These vehicles may turn off the +12V output to the 7-way connector
when in park or during gear shifting, making the existing vehicle
wiring incompatible with the Echo. To use Echo with these vehicles,
visit a CURT authorized installer to install a power wire to the battery.
BEFORE YOU BEGIN
5118 0
ECHO
®
MOBILE BRAKE CONTROLLER
INSTALLATION MANUAL
Ford F-150 (15 - 17)
Ford F-150 (2018 to Current)
VEHICLE-SPECIFIC REQUIREMENTS
NOTICE
NOTICE
WARNING
WARNING
WARNING
Some vehicles may require a trailer to be connected
to detect a load and activate the +12V power.
Consult the vehicle owner's manual for vehicle-specific details or
contact CURT Product Support if you are having trouble diagnosing
the issue. Known vehicle-specific requirements are listed below:
If your vehicle comes with a trailering app or towing prep
package, it may be necessary to activate a tow / haul mode using
a push button or in-dash screen menu. This allows power at the
7-way connector of the vehicle.
See the vehicle owner's manual to enable this feature.

curt Echo Mobile Specifications

General

Brand	curt
Model	Echo Mobile
Category	Controller
Language	English

Summary

BEFORE YOU BEGIN

General Safety Warnings

Key safety warnings regarding manual adherence, distraction, and mounting location.

Vehicle Power Requirements

Specifies essential vehicle connections for the 7-way socket.

Compatibility and Bluetooth Range

Outlines compatibility and Bluetooth range limitations.

VEHICLE-SPECIFIC REQUIREMENTS

Activating Tow/Haul Mode

Explains enabling tow/haul mode for vehicle power at the 7-way.

+12V Power Pin Check

Addresses checking the +12V power pin if the Echo LED is off.

Phone Connection Issues

Guidance for resolving phone connection problems due to incorrect PIN.

Ford F-150 Specifics

Details specific requirements for Ford F-150 models regarding power and mode activation.

DOWNLOAD THE MOBILE APPLICATION

App Store and OS Requirements

Information on where to find and compatibility requirements for mobile apps.

Bluetooth Pairing Process

Steps for enabling Bluetooth and pairing the Echo via the mobile app.

INITIAL SETUP FOR BLUETOOTH CONNECTION

Vehicle Power and Park Status

Prerequisites for setup: vehicle running or ignition ON and in park.

Safety Strap Installation

Instructions for installing the safety strap before inserting the Echo.

Echo Installation and Pairing

Guides on inserting the Echo, pairing with the app, and initial calibration.

INSTALLING THE SAFETY STRAP

Strap Attachment Steps

Detailed steps for attaching the safety strap to the Echo unit.

7-Way Connector Insertion

Guides on inserting the Echo into the 7-way and securing with the strap.

APPLICATION SETUP

Controller Profile Management

Explains managing controller profiles stored on the Echo device for quick access.

Application Profile Creation

Describes creating unlimited trailer profiles stored within the mobile app.

MANAGING TRAILER PROFILES

Creating New Profiles

Steps to create and name new trailer profiles for custom settings.

Modifying and Deleting Profiles

How to modify existing profiles and delete unwanted ones from the application.

Activating Saved Profiles

Process for selecting and activating a previously saved trailer profile.

CONFIGURING PROFILE SETTINGS

Manual Brake Activation

How to manually activate trailer brakes using the app's orange button.

Brake Output and Sensitivity

Understanding brake output indicator, max output, and sensitivity adjustments.

Vehicle Hazard Lights and Screen Theme

Controls for hazard light bypass and changing the app's screen theme.

TEST DRIVE & ADJUSTMENT

Output Adjustment Procedure

Steps for adjusting the max output for optimal trailer braking performance.

Sensitivity Adjustment Procedure

Steps for adjusting sensitivity for smooth and responsive trailer braking.

LED STATUS INDICATOR

LED Indicator Meanings

Explains the various LED colors and patterns indicating device status.

Status Table

A table mapping LED indicators to their specific operational status.

CONDITION NOTIFICATIONS

Bluetooth Connection Loss

Notification when Bluetooth connection is lost and the Echo's fallback behavior.

ELECTRICAL OVERLOAD WARNING

Overload Detection and Resolution

Details on detecting electrical overloads and recommended troubleshooting steps.

TRAILER DISCONNECTION DANGER

Disconnection Warning and Recovery

Warning for trailer 7-way disconnection and steps to restore connection.

TROUBLESHOOTING GUIDE

Common Issues and Solutions

A guide listing common problems, their causes, and possible solutions.

PRODUCT INFORMATION

Warranty and Feedback

Information on product registration, warranties, and providing feedback.

Customer Reviews

Encouragement for users to leave reviews and share their experience.