Curtis enAble 40 - Installation and Wiring Guide; Mounting the 1740 Powerbase

5
Curtis enAble
®
40 Manual, Rev. E
2 — INSTALLATION & WIRING
2
Fig. 2 Mounting
dimensions, Curtis 1740
powerbase.
Dimensions in millimeters (and inches)
INSTALLATION AND WIRING
INSTALLING THE ENABLE
®
40 SYSTEM
The enAble
®
40 modules—powerbase, user handcontrol, and attendant con-
trol—have been designed for convenient installation.
Mounting the 1740 Powerbase
The powerbase is easily mounted to the chair by means of two bolts, and can
be oriented in any position.
A groove on the underside of the powerbase simplifies alignment when
the powerbase is mounted on a tube, and provides stability.