EasyManua.ls Logo

Cushman LSV 800 - Maintenance; Ventilation

Cushman LSV 800
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
1 - 6
1
ALWAYS:
• use the vehicle in a responsible manner and maintain the vehicle in safe operating condition
• read and observe all warnings and operation instruction labels affixed to the vehicle
• use extreme caution in areas where pedestrians are present
• maintain adequate distance between vehicles
• follow all safety rules established in the area where the vehicle is being operated
• reduce speed to compensate for poor terrain or conditions
• apply brake to control speed on steep grades
• reduce speed in wet areas
• use extreme caution when approaching sharp or blind turns
• use extreme caution when driving over loose terrain
MAINTENANCE
ALWAYS:
• replace damaged or missing warning, caution, or information labels
• maintain the vehicle in accordance with the manufacturer’s periodic service schedule
• ensure that repairs are only performed by trained and qualified personnel
• follow the manufacturer’s maintenance procedures
• insulate any tools used within the battery area in order to prevent sparks or battery explosion
• use specified replacement parts. Never use replacement parts of lesser quality
• use recommended tools
• maintain the vehicle in an area away from exposed flame or persons who are smoking
• test drive the vehicle after all repairs or maintenance in a safe area that is free of both vehicular and pedestrian
traffic
• keep complete records of the maintenance history of the vehicle
VENTILATION
• charge the vehicle in a well-ventilated area
• charge in an area free of flammable liquids and items
• charge a vehicle in an area that is free from flame or spark, pay particular attention to natural gas or propane
water heaters and furnaces.
• use a dedicated 15-amp circuit for each battery charger, DO NOT permit other appliances to be plugged into the
receptacle when the charger is in operation.
• operate the charger in accordance with E-Z-GO’s recommendations or applicable electrical codes

Table of Contents