46
PERIODIC SERVICE SCHEDULE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
Owner’s Guide
Front Wheel Alignment - Inspect for unusual tire wear. C&A C&A C&A
King Pins - Check for excessive play and tightness of retaining nuts. * *
Rear Axle - Check for unusual noise and loose/missing mounting hardware. * *
Air Filter Element - Check filter element; clean/replace as required. * *
Oil Filter - Replace (at oil change) RR
Engine Oil - Replace with SAE 10W-30 or 10W-40 that meets or exceeds SF,
SG, CC oil. DO NOT OVERFILL
RR
Drive Belt - Check for cracks, fraying and excessive wear * *
Direction Selector - Check for wear and smooth movement; lubricate shaft
with light oil if required.
C&A C&A
Steering Assembly - Inspect bellows and pinion seal for damage and leakage. * *
Rack End Ball Joint - Check for noise and loose or missing hardware. * *
Battery - Clean battery and terminals **
Front Wheel Bearings - Check and adjust as required. See Repair and Ser-
vice Manual for procedure.
C&A
Rear Axle - Check lubricant level; add lubricant if required. *
Brakes - Clean and adjust. See Repair and Service Manual for procedure. C&A
Brakes - Check brake shoe linings. See Repair and Service Manual for proce-
dure.
*
Fuel Filter - Replace R
Spark Plug - Replace and gap new plug. R
Muffler/Exhaust - Check mounting hardware. Check for leaks at head and
muffler gaskets.
*
Valves - Check cold (intake/exhaust). See Repair and Service Manual for pro-
cedure.
*
Carburetor - Clean CL
Cylinder Head and Piston - Remove carbon from cylinder head and piston. CL
Cylinder Head and Piston - Check valve seats for carbon buildup; clean if
required.
CL
REMARKS
Before each use
DAILY
WEEKLY
20 hrs
MONTHLY
50 hrs
QUARTERLY
125 hrs
SEMI-ANNUAL
250 - 300 hrs
ANNUAL
500 hrs
5 YEARS
*NOTE: Some maintenance items must be serviced more frequently on vehicles used under severe driving conditions.
To Next Page
Loading...
