Custom Audio Electronics Neo - Technical Specifications; Appendix: A1 Tecnical

TECHNICAL SPECIFICATIONS
Neo's-S Neo's-P Neo's-U
Standard interfaces
RS232 serial CENTRONICS USB
Baud rate
From 1200 to
57600 bps
None None
Resolution
204 DPI (8 dot/mm)
Paper specifications
Type of paper
Thermal rolls
Heat-sensitive side on outside of roll
Recommended types of paper KF50 (55g/m 2 ± 5gm 2) KANZAN or Equivalent
Paper thickness 0,063 ± 0,005 mm (KF50)
Paper roll size 60 mm ± 0,5 mm
External roll diameter max. 65 mm
Paper end Not attached to roll core
Internal roll core diameter 12 mm (+1mm)
Core thickness 2 mm (+1mm)
Core type Cardboard or plastic
Sensors
Paper out, head open, head temperature,near paper end
Print method
Thernal fixed head (8 dot/mm)
Print direction
Normal, 180°
Print format
Normal, double and quadruple height and width, expanded,
negative, underlined, script.
Character fonts
ASCII standard, EPSON
â
, International.
Reception buffer
8 Kbyte
Flash memory
256 Kbyte
Graphic memory
Three 32-Kbyte logos
Printing speed
140 mm/sec. (Speed=normal)
110 mm/sec. (Speed=Low)
Cutter specification
Paper cutting Full and partial (mod. with cutter)
Cutting width 63 mm
Life > 300000 cut
Power supply 24 VDC
Absorption 1.2 A max
Reliability
Mechanism reliability > 10
6
lines
Print head reliability > 50 Km
Electric specifications
Power supply (Neo's -S; Neo's-
USB)
100-240Vdc ± 10%
Frequency 50-60Hz
Nominal current 0.5 A
Power supply (Neo's -SP) 24Vdc ± 10%
Electrical input
Average
Low
Normal
1A
1A
Peak
Low
Normal
1.8 A
2A
Stand-by 80 mA
Environmentals conditions
Operating temperature 0°C - 50°C
Operating humidity 10% - 80% (no condensing)
Storage temperature / humidity -20°C - +70°C / 10% - 90%
Compliance standard
Electric safety EN 60950
Electromagnetic compatibility
EN55022 CLASS B
EN55024
A1 TECNICAL SPECIFICATIONA1 TECHNICAL SPECIFICATION