19
3 HEX DUMP PRINT
Turn on the power after placing the Dip SW1 number 8 to ON position. After printing as [HEX
DUMP MODE], it will print all receiving datas to 16 hexadecimal data for all receiving datas. This
would be useful when developing an application because this notifies the transmission status.
Prints if 12 digits is received.
Data under 12 digits will be printed when you press the feed button.
Control code (below 1F
16) will be printed as “.”.
Prints as “^” when 80
16 or above.
[Print Sample]
16 hexadecimal indication ASCII Indication
[HEX DUMP MODE]
41 42 43 44 45 46 47 47 49
30 31 32 33 34 35 36 37 38
FF 1B 69
A B C D E F G H I
0 1 2 3 4 5 6 7 8
^ . i
To Next Page
Loading...
