[Print Density]
-
> 1. Normal
2.
Medium
3.
Dark
4.
Most
Dark
-
>
:
Indicate current set status
Select
and then
Enter...
“->” indicates the currently set value.
3)
In the same way, press for less than 1 second to toggle to the item you want to change and
then set the item.
For example, if you want to change the current setting value from “1. Normal” to “4. Most Dark”,
simply press the FEED button 4 times and then press and hold 1 time..
It was changed successfully!
This indicates that the change was successful.
The value is invalid, try again!
This is displayed when the selected item is invalid or when you move to another menu without
changing the item.
4)
If the change is made successfully, the changeable items printed first are displayed.
If you need to make further adjustments, you can proceed in the same way.
Turn the power off and on after making all the changes.
To Next Page
Loading...
