Custom Audio Electronics P80C - Page 45

45
FS+’&’
Function Korean character mode (2-byte mode) setting
Code
ASCII FS &
Hex 1C 26h
Decimal28 38
Description Sets Korean mode (2-byte mode).
Caution
Necessary when printing Korean characters in extended graphic mode.
It
is automatically recognized during Korean mode, so no setting is
required. (Refer to SUB+'x'+n command.)
FS+’.’
Function Cancel Korean character mode (2-byte mode)
Code
ASCII FS .
Hex 1C 2Eh
Decimal28 46
Description Korean mode (2-byte mode) is deactivated.
Caution
Necessary when deactivating 2-byte mode during extended graphic mode.
It is automatically recognized during Korean mode, so no setting is
required. (Refer to SUB+'x'+n command.)