10
Remote Control Guide
Using your remote control
Understanding the remote control features
• The adjustable bed uses RF (radio frequency) remote control system.
• It is not necessary to face the receiver when operating the remote control. Remote signal is best transmitted
within 9 feet (3 meters) of the bed.
NOTE: The bed may show minor intermittent performance because of typical radio frequency interference. This
is normal in the operation of the bed, not a defect.
1
2
3
4
5
Head and Foot Position Adjustments (1, 2, 3, 4)
Press the button to raise or lower the head and foot sections of your adjustable bed.
Flat (5)
Press and hold this button to return the bed to a flat position.
To Next Page
Loading...