8
Installation Guide
If the adjustable bed frame is set up without a headboard, place your mattress on the adjustable bed
frame surface. Your adjustable bed frame installation is now complete.
If a headboard is to be installed, see "Assembling the headboard bracket."
Installing the Velcro leg straps (optional)
Wrap the bed legs (front & back) together tightly using the
Velcro straps.
Fasten the straps to prevent movement & maintain stability.
1
2
To help prevent base separation when using King Size (2 TXL),
Split California King Size (2 SCK), or Split Queen Size (2 SQ) beds,
use the Velcro straps.*
* Only available in TXL, SCK, and SQ models.
Attaching the mattress retainer bracket
Align the open ends of the retainer brackets with the “loop”
retainer anchors located at the foot of the bed.
Slide the retainer bracket into the anchors allowing the ends
to glide into the loop.
NOTE: It is normal for the retainer bracket to indent into
the sides of the mattress when using the lift positions. This
secures the mattress to the bed deck providing superior
body contouring.
1
2
To Next Page
Loading...