EasyManua.ls Logo

Cutwater 30 - Example of a Spring Pre-Launch Checklist

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
EXAMPLE OF A SPRING PRE-LAUNCH CHECKLIST
CLEANING
£ Remove debris from scuppers and scupper drains.
£ Clean hull using a mild biodegradable detergent and then wax.
£ Clean topsides and decks using a mild biodegradable detergent and then wax.
£ Clean and polish all bright work.
£ Clean and oil teak.
£ Clean windows, ports, and hatches.
£ Clean bimini cover.
£ Check and clean anchor, rode, and anchor storage compartment.
INSPECTION
£ Check Drain Plug
£ Check spare parts and tools and replace as necessary.
£ Check wiper blades.
£ Check swim platform.
£ Inspect and test trim tabs.
£ Check condition of bottom paint.
£ Check windlass.
£ Verify electronics for correct operation.
£ Check all inside and outside lights.
£ Macerator shut off valve in proper position and secured.
£ Inspect and verify position of all sea cocks and shut off valves.
£ Check alarms for proper operation.
£ Check fluid levels.
SAFETY EQUIPMENT
£ Sound signaling device.
£ Check flares and their expiration dates.
£ Check personal flotation devices.
£ Check fire extinguishers and their fill dates.
£ First aid kits.
£ Throw cushions.
GALLEY
£ Check stove for proper operation.
£ Check everyday utensil stock.
DOCUMENTS
£ Registration sticker.
£ Insurance papers and Passports.
£ Boat Inspection sticker.
£ Charts and float plan forms.