EasyManua.ls Logo

CVE JC300 - Recycling Information

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 19
Image 2.3.1 On/Off Switch
POWER OR FUEL SUPPLY FAILURE
Depending on the time elapsed in the service cycle, the consequences of a power
or fuel supply failure may be as follows:
Type of failure
Action
Fuel supply failure
The motor’s supply shall be interrupted immediately and
indefinitely. Fuel must be added to the fuel tank. 5 minutes
must have elapsed since the interruption to replenish the
fuel. Never carry out this operation while the engine is hot.
Electrical ignition circuit failure.
Depending on the duration, the motor’s supply shall be
interrupted immediately and indefinitely. The spark plug
must be cleaned or replaced, and the presence of a spark
must be verified when pulling the recoil starter.
Air supply failure
Air is used as an oxidizer in the motor’s combustion.
Following an air supply failure, the state of the air-intake
filter must be checked.
2.4 Recycling information
The machine must be cleaned, and any fuel removed before disassembly.
Furthermore, all local regulations relating to how to dispose of the machine must
be followed.