EasyManua.ls Logo

CVE JC300 - Entry into Service; Location Requirements

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 20
GENERAL INSTRUCTION FOR DISPOSAL
Once the CLAVAESTACAS JC300 has ceased to work, the different materials
must be separated and recycled in line with national and local environmental
regulations.
HOW TO RECYCLE HAZARDOUS MATERIALS
The CLAVAESTACAS JC300 does not contain any hazardous substances. Any
fuel and oil residues must be recycled in keeping with the instructions issued by
local regulations.
DISPOSAL OF ELECTRICAL COMPONENTS
Waste from the electric ignition system must not be disposed of as unsorted
municipal waste; instead, it must be sorted separately and delivered to an
authorised waste disposal management facility. Should you have any queries,
please contact the manufacturer or an authorised representative in order to obtain
information about the disassembly of the pieces of equipment.
3 Entry into service
The CLAVAESTACAS JC300 is delivered in a box fitted with protective material
and must be carefully unpacked.
In addition to this manual, every CLAVAESTACAS JC300 is supplied with a
manual of the motor’s manufacturer, which among other things, describes the
entry into service process.
For more detailed information about the machine’s operation, please see the
motor’s manual and this operations manual. If in doubt, please contact the
manufacturer or an authorised representative.
3.1 Location requirements
Parameter
Requirement
Room temperature
Between 4 °C and 40 °C
Location
In open spaces.