Page 4
1 Introduction
Congratulations for choosing the Clavaestacas JC300 post driver.
1.1 Important user information
P
REVIOUS REQUIREMENTS
The machine’s manual is delivered together with the motor’s manual. It is
important for both manuals must be stored together at all times in order to be able
to resolve any issues about the machine. All the motor’s instructions are
contained in the manual.
PLEASE READ THIS MANUAL carefully for information about the correct
transport, management and maintenance of the machine. Failing to do so may
derive in personal injury or equipment failures. This manual and the safety
stickers on your machine may be available in other languages (please contact
the manufacturer).
THIS MANUAL MUST BE CONSIDERED an integral part of the machine and be
delivered together with it, should it be resold.
THE MEASUREMENTS present in this manual will be expressed using the metric
system.
The RIGHT AND LEFT sides shall be established facing the machine from the
opposite side of the recoil starter.
PLEASE MAKE A NOTE OF THE PRODUCT’S IDENTIFICATION NUMBERS.
The manufacturer will need these numbers for the purposes of ordering spare
parts. Store these numbers in a safe location outside the machine.
Any ELECTRICAL OR MECHANICAL manipulation of the hammer cover or
tweaks or adjustments to the machine BEYOND THOSE SPECIFIED by the
manufacturer shall render the warranty void.
Any MANIPULATION OF THE ALTERNATIVE SET that modifies the DRIVING
FREQUENCY OR THAT BROADENS the post-driving range BEYOND THE
MANUFACTURER-SPECIFIED values shall render the warranty void.
Any MANIPULATION OR MODIFICATION of any of the machine’s parts or
accessories shall render the warranty void.
The Clavaestacas JC300 may not be used in such a way, or in operations or
conditions not foreseen by the manufacturer.
To Next Page
Loading...
General