Page 7
Electromagnetic compatibility directive (EMC)
INTERNATIONAL STANDARDS
UNE-EN ISO 12100-1:2010. Safety of machinery. Basic concepts and general
design principles. Part 1: Basic terminology, methodology.
UNE-EN ISO 12100-2:2010. Safety of machinery. Basic concepts and general
design principles. Part 1: Technical principles.
EN 563:1996. Safety of machinery. Accessible surface temperatures. Ergonomic
data to establish hot surface threshold temperature values.
EN 614-1:1996. Safety of machinery. Ergonomic design principles. Part 1:
Terminology and general principles.
EN 953:1998+A1:2009. Safety of machinery. Guards. General requirements for
the design and construction of fixed and mobile guards.
UNE-EN ISO 13849-1:2008. Safety of machinery. Parts of the command systems
relating to safety. Part 1: General design concepts.
EN 1005:1993. Safety of machinery. Physical human capacity. Part 2: Manual
handling of objects associated to machines.
UNE-EN ISO 14121:2007. Safety of machinery. Risk assessment principles.
EN 1127-1:1997. Explosive atmospheres. Explosion prevention and protection.
Part 1: Basic concepts and methodology.
EN 1299:1997. Mechanical vibration and shock. Vibration isolation of machines.
Information for the application of isolation at source.
EN ISO 3746:1995. Acoustics. Determination of sound power levels of noise
sources using sound pressure. Control method on an enveloping measurement
surface over a reflective plane.
EN ISO 11202:1995. Acoustics. Noise emitted by machinery and equipment.
Measurement of emission sound pressure levels at a workstation and other
specified positions. Survey method in situ.
ISO/TR 11688-1:1995. Acoustics. Recommended for the design of low-noise
machinery and equipment. Part 1: Planning.
EN 60204-1:2007. Safety of machinery. Electrical equipment of machines. Part
1: General requirements.
To Next Page
Loading...