Cyber Power OL1000RTXL2U User Manual

Battery Replacement
Instructions
Smart App Online RT 1-3KVA Series
MODEL: OL1000RTXL2U, OL1500RTXL2U, OL2200RTXL2U,
OL3000RTXL2U, OL3000RTXL2UHV, OL1000ERTXL2U,
OL1500ERTXL2U, OL2000ERTXL2U, OL3000ERTXL2U,
OL1000RT JP, OL1500RT JP, OL2200RT JP, OL3000RT JP
2. Remove the screws securing the battery retention panel.
3. Pull the battery pack out together with the retention panel slowly
and then put the new battery pack back into the UPS.
1. Remove the front faceplates.
4. Reconnect the battery pack connectors to the UPS. Then tighten the
screws of the battery retention panel.
5. Reinstall the front faceplates.
1
3 4
5
2
2. Remove the screws securing the battery retention panel.
3. Pull the battery pack out together with the retention panel slowly
and then put the new battery pack back into the UPS.
1. Remove the front faceplates.
4. Reconnect the battery pack connectors to the UPS. Then tighten the
screws of the battery retention panel.
5. Reinstall the front faceplates.
Smart App Online Tower 1-3KVA Series
MODEL: OL1000XL, OL1500XL, OL2200XL, OL3000XL, OL1000EXL,
OL1500EXL, OL2000EXL, OL3000EXL, OL1000XL JP,
OL1500XL JP, OL2200XL JP, OL3000XL JP
1
4 5
2 3
2. Remove the screws securing the battery retention panels.
3. Pull the battery packs out together with the retention panels slowly
and then put the new battery packs back into the EBM.
1. Remove the front faceplates.
4. Reconnect the battery pack connectors to the EBM enclosure. Then
tighten the screws of the battery retention panel.
5. Reinstall the front faceplates.
Smart App Online EBM for RT 1-1.5KVA Series
MODEL: BP36V60ART2U, BPE36V60ART2U, BPE36V60ART2US
21
43
5
K01-0000459-01

Cyber Power OL1000RTXL2U Specifications

General

Type	Line Interactive
Topology	Line Interactive
Output Power Capacity	1000 VA / 900 W
Input Voltage	120 V
Output Voltage	120 V
Output Waveform	Sine Wave
Waveform	Sine Wave
Communication Ports	USB, Serial
Rack Size	2U
Operating Temperature	32°F to 104°F (0°C to 40°C)
Output Frequency	50/60Hz
Battery Type	Sealed Lead-Acid (SLA)
Data Line Protection	RJ45
Input Voltage Range	90-140V
Number of Outlets	8
Typical Battery Recharge Time	4 Hours
Transfer Time	4 ms
Form Factor	Rackmount/Tower

Summary

Smart App Online RT 1-3KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Secure Battery Retention Panel

Remove screws securing the battery retention panel.

Replace Battery Pack

Pull out the battery pack with retention panel and insert new pack.

Reconnect and Secure Battery

Reconnect battery connectors and tighten retention panel screws.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Smart App Online Tower 1-3KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Secure Battery Retention Panel

Remove screws securing the battery retention panel.

Replace Battery Pack

Pull out the battery pack with retention panel and insert new pack.

Reconnect and Secure Battery

Reconnect battery connectors and tighten retention panel screws.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Smart App Online EBM for RT 1-1.5KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Secure Battery Retention Panels

Remove screws securing the battery retention panels.

Replace Battery Packs

Pull out battery packs with retention panels and insert new packs.

Reconnect and Secure EBM Battery

Reconnect battery connectors and tighten retention panel screws.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Smart App Online EBM for RT 2-3KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Disconnect Battery and Remove Panel

Remove screws, disconnect cables, and remove the panel.

Insert New Battery Packs

Pull out old battery packs and insert new battery packs.

Reconnect Battery and Secure Panel

Reconnect battery pack and secure the retention hardware.

Polarity Warning

Warning about correct polarity for battery connections.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Smart App Online RT 6-10KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Secure Battery Retention Panel

Remove screws securing the battery retention panel.

Access Battery Compartment

Raise retention panel to allow battery trays to be pulled out.

Replace Battery Trays

Pull out old battery trays and insert new battery trays.

Reconnect and Secure Battery

Align and reconnect battery connectors and tighten panel screws.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Smart App Online Tower 6-10KVA Series Battery Replacement

Remove Front Faceplates

Procedure to remove the front faceplates before battery replacement.

Secure Battery Retention Panel

Remove screws securing the battery retention panel.

Access Battery Compartment

Raise retention panel to allow battery trays to be pulled out.

Replace Battery Trays

Pull out old battery trays and insert new battery trays.

Reconnect and Secure Battery

Reconnect battery connectors and tighten panel screws.

Reinstall Front Faceplates

Reinstall the front faceplates after battery replacement.

Replacement Battery Pack Table

Battery Pack Compatibility

Table listing battery pack models, quantities, and compatible UPS or EBM models.