IPC R1s & IPC E1s Specifications
Supports Intel Skylake & Kabylake 6
th
& 7
th
Generation Processor,
Socket LGA 1151
2 x DDR4 SO-DIMM sockets, up to 64GB combined
Supports memory data transfer rates of 2133MHz/2400 MHz for
DDR4, un-buffered non-ECC DDR4 SO-DIMMs
Serial ATA controller facilitates high-speed transfers up to 6Gbps
Maximum 2 x 2.5” HDD or SSD
Skylake: Integrated Intel® HD Graphics 530
Kabylake: Integrated Intel® HD Graphics 630
1x Display Port, up to 4096 x 2304 @ 60Hz
1x DVI-D, up to 1920x1200 @ 60Hz
1x DVI-I, up to 1920x1200 @ 60Hz
2x RJ45 Gigabit (Gbe) LAN
IPC E1S: 4x 802.3at PoE+, RJ45 Gigabit (Gbe) LAN
1 x DC-IN Power Connector (6-36V)
1x DC-IN Terminal Block Connector
1x Remote On/Off & Ignition Terminal Block
IPC-E1s: 16x Isolated DIO (8 DI, 8 DO)
IPC-R1s: 19V / 6.32A Power Adapter, 120W, AC Input: 100-240V
AC / 2.0-1.0A / 50-60Hz
IPC-E1s: 19.5V / 9.23A Power Adapter, 180W, AC Input: 100-
240V AC 2.0-1.0A / 50-60Hz
Intel AC7260 support IEEE802.11ac + BT4.0 (Optional)
Ambient Temperature: -20°C ~ 70°C (operating)
10% ~ 95% (non-condensing)
5 Grms @5-500 Hz according to IEC60068-2-64
Operating, 50 Grms, Half-sine 11ms duration according to
IEC60068-2-27
10.2” x 6.9” x 3.1” (L,W,D)