EasyManua.ls Logo

Cybernet IPC-R1s User Manual

Cybernet IPC-R1s
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Cybernet IPC-R1s and is the answer not in the manual?

Cybernet IPC-R1s Specifications

General IconGeneral
Power Input12V DC
Ethernet2x Gigabit Ethernet
Serial Ports2 x RS-232/422/485
USB Ports4x USB 2.0
Video Output1x VGA, 1x HDMI
Operating SystemWindows 10

Summary

Declaration of Conformity and Compliance

Trademarks

Lists registered trademarks of various companies mentioned in the manual.

WEEE Statement

Details European Union directives regarding waste electrical and electronic equipment.

Cybernet's Recycling Program

Safety Instructions

Introduction to IPC-R1s/E1s

IPC R1s & IPC E1s Specifications

IPC-R1s & IPC-E1s Overview

IPC-R1s Dimension

Provides the physical dimensions for the IPC-R1s model.

IPC-E1s Dimension

Provides the physical dimensions for the IPC-E1s model.

IPC-R1s & IPC-E1s Front I/O View

Reset Tact Switch

Details the hardware reset switch for system reboots.

Power Button

Explains the power button functionality and LED indicators.

Cfast Card and Indicators

Cfast Card

Information on installing and using Cfast cards.

PWR and HDD LED Indicator

Explains the meaning of PWR and HDD LED indicators.

Video Output Connectors

DVI-D Connector

Details the DVI-D output port and its maximum resolution.

DVI-I Connector

Details the DVI-I port supporting DVI and VGA display modes.

Data and Network Ports

Display Port

Information on the Display Port and its high-resolution capabilities.

USB3.0

Details on USB 3.0 ports, speed, and compliance.

Ethernet Port

Information about Gigabit Ethernet LAN ports and their features.

SIM Card Slots

Front Panel Components

Audio Jacks

Details on microphone and line-out audio jacks.

SSD/HDD Trays

Information about front-accessible 2.5" SSD/HDD locking trays.

IPC-R1s & IPC-E1s Back I/O View

Power Terminal Block

Details the DC power input terminal block and its pinout.

Ignition Control and GPIO

Power On/Off Switch & Ignition

Information on the terminal block for power on/off and ignition signals.

GPIO (IPC-R1s only)

Pin assignments for programmable GPIO on IPC-R1s models.

Isolated DIO for IPC-E1s

DIO Connector Pin Assignments

Serial Ports

Serial Port Configuration and Pinouts

Configuration options and pin assignments for serial ports.

Ignition Control Features

PoE (Power over Ethernet) Ports (IPC-E1s only)

Details on the 4x Ethernet ports supporting PoE+ on IPC-E1s.

Ignition Control Functionality

Explains the system's ignition power control for in-vehicle applications.

Adjusting Ignition Control Modes

How to adjust power on/off delay periods using DIP switches.

Ignition Control Wiring and Settings

Ignition Control Wiring

Wiring instructions for activating ignition control via rear IO terminal blocks.

Power Management in Windows OS

Power Management Settings

Steps to configure power saving features like display off and sleep mode.

Power Plan Selection

Guide to selecting and fine-tuning power plans for energy efficiency.

Waking the System Up

IPC-R1s / IPC-E1s BIOS Introduction

Appendices

Isolated DIO Guide

Guide for the 16-bit Isolated DIO connector on the E1S model.

DIO and PoE Signal Details

PoE Definition

Definition and diagram for Power over Ethernet ports.

DIO Signal Circuits

Diagrams illustrating DIO signal circuits in Sink and Source modes.

DO Reference Circuits

Support and Recycling Information

Cybernet Recycling Program

Information on how to recycle old computers through Cybernet.

Getting Help

Contact information for Cybernet's corporate and regional support.