EasyManua.ls Logo

CyberPower CP1000PFCLCD - User Manual

CyberPower CP1000PFCLCD
21 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual of Product 1:
CyberPower CP1000PFCLCD PFC Sinewave UPS System,
1000VA/600W, 10 Outlets, AVR, Mini-Tower
User Manual of Product 2:
CyberPower CP850PFCLCD PFC Sinewave UPS System,
850VA/510W, 10 Outlets, AVR, Mini-Tower

Other manuals for CyberPower CP1000PFCLCD

Preview: Battery Replacement Manual
Battery Replacement Manual2 pages
Preview: Function Setup Guide
Function Setup Guide2 pages

Questions and Answers

  • K
    Kathleen JonesJul 25, 2025
    What to do if my CyberPower CP1000PFCLCD will not turn on?
    • S
      stephaniegonzalezJul 25, 2025
      If your CyberPower UPS doesn't turn on, there are several possible reasons. First, the on/off switch might be preventing rapid cycling. Turn the UPS off, wait 10 seconds, and then turn it back on. Ensure the UPS is connected to a working 110/120V 60Hz outlet. Also, the USB cable must be connected to the UPS unit and an open USB / serial port on the back of the computer, using the cable that came with the unit.
  • T
    Traci HughesJul 31, 2025
    Why is the circuit breaker button projecting from the back of my CyberPower CP1000PFCLCD UPS?
    • J
      Jennifer PorterJul 31, 2025
      If the circuit breaker button is projecting from the back of your CyberPower UPS, it means the circuit breaker has been tripped due to an overload. To fix this, turn the UPS off and unplug some equipment. Wait 10 seconds, then reset the circuit breaker by pushing the button in. After that, turn the UPS back on.
  • G
    Gerald BryanAug 6, 2025
    What to do if my CyberPower CP1000PFCLCD doesn't perform the expected runtime?
    • J
      James EllisAug 6, 2025
      If your CyberPower UPS isn't running as long as expected, the battery might not be fully charged. Try recharging the battery by leaving the UPS plugged in.
  • W
    Wanda ChaseAug 12, 2025
    What to do if PowerPanel is inactive on my CyberPower CP1000PFCLCD UPS?
    • M
      Michael WilliamsAug 12, 2025
      If PowerPanel is inactive and all icons are grayed out, it could be that the unit isn't providing battery power. To resolve this, shut down your computer, turn the UPS off, wait 10 seconds, and then turn the UPS back on. This should reset the unit. Also, ensure you are using the serial cable that came with the unit.
  • B
    Brian MolinaAug 18, 2025
    What to do if USB power ports are not providing power on my CyberPower CP1000PFCLCD?
    • K
      Kristina SimpsonAug 18, 2025
      The USB power ports on your CyberPower UPS may stop providing power if the total current draw of connected devices exceeds 3.1A, due to the Over Current Protection design. To resolve this, turn the UPS off, unplug at least one device connected to the USB power port, and then turn the UPS back on.

Summary

Important Safety Warnings

General Electrical and Installation Safety

Precautions for preventing fire, shock, and proper installation.

Battery and Usage Restrictions

Warnings on battery handling and prohibited usage environments.

Installing Your UPS System

Hardware Installation Guide

Replacing the Battery

Battery Safety Precautions

Warnings for energy hazard, disposal, and handling.

Battery Replacement Procedure

Step-by-step guide for replacing UPS batteries.

Definitions for Illuminated LCD Indicators

Definitions for Illuminated LCD Indicators - Continued

LCD Indicator Explanations

Troubleshooting

Troubleshooting - Continued

Common UPS Problems and Solutions

Lists problems, possible causes, and solutions.

Technical Specifications

UPS Model Specifications

CyberPower CP1000PFCLCD Specifications

General IconGeneral
Output power600 W
UPS topologyLine-Interactive
Input frequency60 Hz
Audible alarm(s)Yes
Surge energy rating1030 J
Output power capacity1 kVA
Emergency Power Off (EPO)No
Battery type12V/9AH
Weight (imperial)15.9 lbs
Nominal input voltage90-140 V
Nominal output voltage120 V
Dimensions (W x D x H) (imperial)3.9 x 10.4 x 9.1 \
AC outlet typesNEMA 5–15R
AC outlets quantity10 AC outlet(s)
Serial ports quantity1
Form factorTower
Cable length1.52 m
Display typeLCD
CertificationUL1778, cUL 107.3, FCC DOC Class B
Product colorBlack
Battery technologySealed Lead Acid (VRLA)
Battery recharge time8 h
Typical backup time at full load3 min
Typical backup time at half load9 min
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Sustainability certificatesRoHS
Bundled softwarePowerPanel Personal Edition

Related product manuals