CyberPower PDU31 Series User Manual

17
Web Interface
Intelligent PDU User Guide
Log Tab > Energy Records
Item
Definition
HOST/GUEST#
Select the role of PDU (HOST or GUEST#) if PDUs are daisy
chained. Up to 3 GUEST PDUs can connect to 1 HOST PDU.
Interval Energy (kWh)
Energy consumed by connected device(s) during a specific time
interval, measured in kWh. This interval can be set in Log Tab >
Maintenance.
Interval Cost (units)
Cost of the energy consumed by the connected device(s) during a
specific time interval, equal to Electricity Rate multiplied by Interval
Energy. The interval and electricity rate can be set in Log Tab >
Maintenance.
Interval CO2 (kg)
Equivalent CO2 emission of the connected device(s) during a
specific time interval, equal to CO2 Emissions multiplied by Interval
Energy. The interval and CO2 emissions can be set in Log Tab >
Maintenance.
Energy (kWh)
Accumulated Interval Energy since the last reset. The reset can be
set in Log Tab > Maintenance.
Cost (units)
Accumulated Interval Cost since the last reset. The reset can be set
in Log Tab > Maintenance.
CO2 (kg)
Accumulated Interval CO2 since the last reset. The reset can be set
in Log Tab > Maintenance.
Outlet # (kWh)*
Accumulated Interval Energy of a specific outlet since the last reset.
The reset can be set in Log Tab > Maintenance.
*For Switched Metered by Outlet Series only.

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English