CyberPower PDU31 Series User Manual

34
Web Interface
Intelligent PDU User Guide
System > Notification > SMS Service
Using HTTP POST:
Use the example where Clickatell is the SMS provider.
The basic form of URL is: http://api.clickatell.com/http/sendmsg
The basic form of body is:
user=tedmosby&password=himym&api_id=2014331&to=E_PHONE_NUMBER&text=E_
MESSAGE
Query String in Body
Definition
user=tedmosby
Replace “tedmosby” with the user name created at the Clickatell
website.
password=himym
Replace “himym” with the password created at the Clickatell website.
api_id=2014331
Replace “2014331” with the API ID acquired at the Clickatell website.
to=E_PHONE_NUMBER
Do not replace this information. It refers to the receiver phone number
entered in System Tab > Notification > SMS Recipients.
text=E_ MESSAGE
Do not replace this information. It refers to the event action sent by
SMS service provider. For configurations, see System Tab >
Notification > Event Action.

CyberPower PDU31 Series Specifications

General

Brand	CyberPower
Model	PDU31 Series
Category	Power distribution unit
Language	English