31
4. While holding the Base with one hand,
push button on belt tensioner Handle
without using your thumb and pull open.
5. Extend the LATCH/UAS Straps to their
longest length, making sure the straps
lie at and are not twisted.
6. Push the LATCH/UAS Connectors onto
the vehicle lower anchor bars on both
sides of the Base until you hear them
CLICK, then CHECK to make sure they
are securely attached by pulling on
them.
NOTE: For installations
where vehicle lower anchors
may be difcult to reach,
you may obtain LATCH/UAS
Guides by calling ParentLink
Customer Service at 1-877-
242-5676.
Installing and Removing the Infant Car Seat
Installing with Base Using LATCH/UAS
yy
tt
rr
CLICK!
To Next Page
Loading...
