CYBEX gold ATON G User Manual

46
Installing and Removing the Infant Car Seat
Installing the Infant Car Seat Only Using Lap/Shoulder Belts
8. Grab the Infant Car Seat at the Belt
Guides and pull from side to side and
front to back to make sure it is installed
correctly. The Infant Car Seat should
not move more than 2.5 cm (1 in) in any
direction.
If the Infant Car Seat moves too much,
tighten the vehicle belts more and
recheck. You may try a different vehicle
seat or installation method, or both.
ii

CYBEX gold ATON G Specifications

General

Brand	CYBEX gold
Model	ATON G
Category	Car Seat
Language	English