109
Removing the Seat Cover
To remove please follow these steps:
1. Unfasten the harness buckle.
2. Unfasten the chest clip.
3. If using the newborn insert, remove it.
4. If using buckle cover, remove it.
5. Unsnap the shoulder pads.
6. Adjust the headrest to its highest position.
7. Unsnap the back of the headrest.
8. Unsnap the two snaps creating the harness
slot.
9. Lift back pad and headrest cover o the
headrest.
10. Unsnap each side of the back padding
and pull forward.
11. Pull seat cover away from harness
adjustment cover.
12. Starting at the bottom of the seat, pull the
seat cover away from the child restraint.
Installing the Seat Cover
Reverse the removal instructions to reinstall the
Seat Cover.
The integrated harness system cannot be removed from the seat. NEVER remove or attempt
to remove parts of the harness system.
WARNING! The child restraint must NEVER be used without the cover.
DO NOT damage, remove, or dispose of any EPS foam.
CARE AND CLEANING
GENERAL
To Next Page
Loading...
Need help?
General
