91
USING CHILD RESTRAINT IN BOOSTER MODE
Place booster seat on a FORWARDFACING
vehicle seat with a lap/shoulder belt. The base
should sit as flat as possible on the vehicle seat
touching the vehicle seat back and bottom.
IMPORTANT: You may use the tether strap and
lower anchor connectors to secure this booster
seat to the vehicle seat as long as the position
of the booster seat in the vehicle and/or the
resulting fit of the vehicle seat belt over the child
are not affected.
When installing the booster seat, place child in
booster seat and fasten buckle and listen for an
audible click. Always pass shoulder belt portion
of vehicle belt through the shoulder belt guide as
shown.
Adjust head support so the vehicle shoulder
belt lies between child's neck and shoulder.
Vehicle belts must lie flat and not be twisted.
NEVER use a lap belt only.
6
6
7 7
Shoulder
belt guide
BOOSTER MODE
To Next Page
Loading...
Need help?
General
