HE
AR
EN
27
NOTE! Please ensure that the surface of the Base M i-Size
is free of objects.
)11(
Put the CYBEX SIRONA M2 i-Size in the required direction
onto the Base M i-Size. Ensure that both rods lock with an
audible „CLICK“. Next control if the indicator (11) on the
Base M i-Size shows GREEN. If the indicator shows RED
the seat is not locked well. Repeat the process if necessary.
)13()(
)11(
)13()(
Push the central release button (12) and one of the release
buttons on the side (13) simultaneously to unlock the
CYBEX SIRONA M2 i-Size from the base.
Tilt the seat a little. The indicator (11) now shows RED.
Now you can release the unlocking buttons (12) and (13) to
lift the CYBEX SIRONA M2 i-Size off the Base M i-Size.
Locking of the CYBEX SIRONA M2 i-Size car seat
Releasing the CYBEX SIRONA M2 i-Size car seat
INSTALLATION OF THE SEAT ON BASE
To Next Page
Loading...
Need help?
General
