L
L
12
STEP 1
Connect the Backrest to the Booster Base.
STEP 2
Fold the Backrest up until it CLICKS into place.
STEP 3
Line up the tabs on the left L.S.P. Bolster with key holes on
the Shoulder Pad and slide down to lock in place.
Repeat with the Right L.S.P. Bolster.
ASSEMBLY
• NEVER USE the Booster Base without the Backrest attached.
• NEVER use this booster seat with the Backrest past the allowable adjustment range. An
audible CLICK will alert you when you have gone too far.
!
WARNING! DEATH or SERIOUS INJURY can occur
1 2
3
To Next Page
