EN
17
The Solution Z-x is designed to be used with the vehicle’s
lower LATCH/UAS anchors, if available. This booster seat
may also be used in seating positions without lower LATCH/
UAS anchors (see page 19).
STEP 1
Select a seat location allowed by your vehicle manufacturer
equipped with a LAP AND SHOULDER BELT system.
Locate the lower LATCH/UAS anchors or the symbols
indicating their location.
STEP 2
If the lower anchors are hidden behind the crease between
the seat back and seat cushion, install the supplied LATCH/
UAS Guides to the lower LATCH/UAS anchors for easier
installation of the booster seat.
To install, connect the two LATCH/UAS Guides to the two
lower anchors by sliding the LATCH/UAS Guides into the
crease and under the lower anchor.
INSTALLING USING LATCH/UAS
1 2
To Next Page
Loading...
