EN
19
First, refer to pages 13–14 for Vehicle Seat Location
Requirements.
Select a seat location allowed by your vehicle manufacturer
that is equipped with a LAP AND SHOULDER BELT system.
With the LATCH/UAS connectors pushed in and stored away
(see page 26), simply place the booster seat on the vehicle
seat, making sure that the Backrest is in full contact with the
vehicle seat back and does not interfere with the vehicle’s
headrest.
INSTALLING WITH SEAT BELT ONLY
• ACCORDING TO ACCIDENT STATISTICS, children are safer when properly
restrained in rear vehicle seating positions.
• NEVER USE the Booster Base without the Backrest attached.
• NEVER USE a locking clip when installing this booster seat.
!
WARNING! DEATH or SERIOUS INJURY can occur
To Next Page
Loading...
