10
4
3
2
2
1
1
The child seat consists of a booster seat (1) and a backrest (2).
Only the combination of these two parts provides best protection
and comfort to your child.
Connect the backrest (2) to the booster (1) by hooking the guide
lug (3) on the axis (4) of the booster (1).
FIRST INSTALLATION
!
WARNING! The parts of the Solution B-x must not
be used alone or in combination with boosters,
backrests or headrests from other manufacturers or
from dierent product series. In such instances, the
certication expires immediately.
!
WARNING! Always ensure that the individual com-
ponents of the child seat are never compressed or
jammed (e.g. by jamming in the car door or when ad-
justing the back seat).
NOTE! Always keep these instructions to hand (e.g. in the
designated compartment on the bottom of the booster seat).
To Next Page
Loading...
