EasyManua.ls Logo

Cybex Silver SOLUTION B-FIX - POSITIONING THE SEAT CORRECTLY IN THE VEHICLE

Cybex Silver SOLUTION B-FIX
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
The child seat with stored Latch-Connect System
system can be used on all vehicle seats with automatic
three-point safety belts approved in the vehicle manual
for, “universal” use.
A “semi-universal” certication is given to restraint systems that
are connected to the car through the Latch-Connect-System.
For this reason, the Latch-Connect System can only be used in
certain vehicles. Please refer to the enclosed vehicle type list for
approved vehicles. You can obtain the most up-to-date version
from www.cybex-online.com.
In exceptional cases, the child seat may also be used on the
front passenger seat. Please note the following in this case:
In cars with airbags, you should push the passenger seat back
as far as possible. When doing so, however, ensure that the
upper pivot point of the safety belt is behind the belt feed point
of the child seat, that the belt can retract correctly.
Always comply with the recommendations of the
vehicle manufacturer.
POSITIONING THE SEAT CORRECTLY IN THE VEHICLE
!
WARNING! The seat is not suitable for use with a
two-point or lap belt. If the seat is secured using a
two-point belt, an accident may result in severe or
even fatal injuries to the child.

Table of Contents

Related product manuals