CYBEX 400T - Service Schedule

36
5 / M
AINTENANCE
Odometer Reading in
Miles (Km)
Check Running Belt & Tension/Track as needed
Vacuum debris inside hood cover and clean treadmill
Replace the Running Belt
Check the current draw
Measure Motor Brush Length
100 (162)
X
250 (402)
X
750 (1207)
X
1000 (1609)
XX
1250 (2012)
1500 (2414)
XX
1750 (2816)
2000 (3219)
XX
2250 (3621)
2500 (4023)
XX
2750 (4426)
3000 (4828)
XX
3250 (5230)
3500 (5633)
XX
3750 (6035)
4000 (6437)
XX
4250 (6840)
4500 (7242)
XX
4750 (7644)
5000 (8047)
XX
X
XX
5250 (8449)
5500 (8851)
XX
5750 (9254)
6000 (9656)
X
X
X
X
X
XX
X
X
X
6250 (10058)
6500 (10461)
XX
6750 (10863)
7000 (11265)
XXXXXX
115V Unit Max Current Draw, Displayed at 3.0 MPH, walking on it => 18 Amps at 0% Grade
220V Unit Max Current Draw, Displayed at 3.0 MPH, walking on it => 10 Amps at 0% Grade
Minimum brush length, as measured from top of 'box' shape to the bottom: 0.438 (7/16") (1.1 cm)
Running belt should not noticeably slip when loaded at 3.0 MPH.
If so, tighten each rear bolt 1/4 turn clockwise and retest.
Replace deck at 14000 miles (22,530 Km)
500 (805)
XX
Check deck wear
Lubricate Elevation
X
X
Service Schedule