45
6 / TROUBLESHOOTING
Active keys during this test:
Note: The keys listed below must be held for two seconds to
activate the described response.
START/ENTER will advance you to the next diagnostic test.
STOP will exit and return you to the mode you were in before
entering the diagnostic tests.
SHIFT backs you up one step in the diagnostics test menu.
d7: TOTAL TIME
This test displays the total accumulated time to date, in hours,
that the treadmill has been used.
The diagnostic test number, d7, is displayed in the left control
panel window. The right control panel window displays the
hours. The time starts in the right window but as the number of
hours increases it expands into the left window.
For example:
d711 TIME 8941
This display indicates 118,941 hours.
Active keys during this test:
START/ENTER will advance you to the next diagnostic test.
STOP will exit and return you to the mode you were in before
entering the diagnostic tests.
SHIFT backs you up one step in the diagnostics test menu.
d8: TOTAL DISTANCE
This test displays the total accumulated distance to date, in
miles (or km), that the treadmill has been used. The diagnostic
test number, d8, is displayed in the left control panel window.
The right control panel window displays the distance in miles
(km) if 9,999 or less. As the number increases to 10,000 and
above, the most significant digits expand into the left window,
as additional space is needed.
For example:
d8 5 1938 DISTANCE
This display indicates 51,938 miles.
Active keys during this test:
START/ENTER will advance you to the next diagnostic test.
STOP will exit and return you to the mode you were in before
entering the diagnostic tests.
SHIFT backs you up one step in the diagnostics test menu.
d9: NUMBER OF STARTS
This test displays the total accumulated distance to date, in
miles (km), that the treadmill has been used.
To Next Page
Loading...
Need help?
General
