Cybex Owner’s Manual
17
Verify power supply is compliant with local building codes.
Unit Assemby
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage the
following procedure must be followed. Use extreme caution when assembling
the unit. Failure to do so could result in injury.
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage
the following procedure must be followed. Always use proper lifting methods
when moving heavy items.
Tools Required
• 3/16” Allen wrench (supplied with 770R only)
• Phillips screwdriver
• 1/2” Socket wrench
• 9/16” Open end wrench
The words “left” and “right” denote the user’s orientation.
Read and understand all instructions thoroughly before assembling the unit.
Verify correct package.
1. Read box label to verify the model number and voltage match what was ordered.
2. Lift and remove cardboard sleeve surrounding unit.
3. Verify paint color matches what was ordered.
4. Verify correct voltage by reading voltage sticker near power outlet. AC power kit is optional.
To Next Page
Loading...
Need help?
General
