Cybex Owner’s Manual
32
Setup options
Enter setup options.
1. Press the Cybex logo icon
to display the Access Toolbox and Lock Screen
options.
2. Press the Access Toolbox icon to display the Access to Toolbox login screen.
3. Enter the sequence:
.
4. Press the Setup icon to display the setup menu.
The Setup options are:
Time See Initial setup above.
Date See Initial setup above.
Units See Initial setup above.
A/V Device (not shown for
E3 View Monitor)
Select No TV or Wireless TV.
A/V Cong (not shown for
E3 View Monitor)
Active when A/V Device is set to Wireless TV. See A/V Cong and
FM Radio Presets below.
FM Radio Presets (not
shown for E3 View Monitor)
Active when A/V Device is set to Wireless TV. See A/V Cong and
FM Radio Presets below.
PEM Setup Active when A/V Device is set to Embedded TV. See
E3 View Monitor Controls and E3 View Monitor Setup below.
Workout times Set Default and Max workout times. Default choices are 20, 30, or
60 minutes. Max choices are 20, 30, 60, or OFF.
Pause Set Pause time. Choices are OFF, 0:30, 1:00, or 2:00 minutes.
Sound Console beeper: Choices are On, or Off.
Headphone beeper: Some, all, or off.
Default Volume: 1 to 31. Default is 10.
Language Select language to use for CardioTouch text. Toolbox is only
available in English.
Restore Factory Defaults Restores all setup variables back to factory defaults. Does not affect
Time or Date.
Exit Set Up Mode
Exit Set Up Mode by tapping the Toolbox icon
, then tap the Home icon . The screen will
refresh.
To Next Page
Loading...
Need help?
General
