Cybex Owner’s Manual
37
Adjust sound volumes
After completing the channel setup, it may be necessary to adjust the volume level of each TV so they
all have similar volume levels. Since the FM Radio station volume can not be adjusted, this will be
used as a ‘base line’ volume to adjust the TV’s to.
1. Plug headphones into headphone jack.
2. Begin striding and press the QUICK START icon.
3. Press the TV icon.
4. Tap Next or Previous to select an FM radio station. This volume is not adjustable and
is the base volume.
5. Tap Up or Down to select a TV station.
6. Adjust the volume of each TV to match an FM Radio Station or each other using the TV’s
remote control. The goal is for a volume setting of 10 on the unit to be the same for all TV and
FM channels.
7. Repeat procedure for all TV’s.
Using the Cybex Wireless Audio Receiver
1. Plug headphones into headphone jack.
2. Begin striding and press the QUICK START icon.
3. Tap the TV icon to listen to TV channels. Press the FM icon to listen to FM radio channels.
4. Tap Next or Previous to change TV or FM channels.
5. Tap volume Up or Down to adjust volume.
To Next Page
Loading...
Need help?
General
