CYBEX ATON 3S User Manual

12
• The headrest must be adjusted to leave free two
 ngers’ width between the child’s shoulder and the
headrest.
• Activate the adjustable handle ring on the upper side of
the headrest b and bring the headrest into the required
position.
• In the lowest positions of the headrest, the seat insert
can be used as a newborn support by simply folding the
lower part.
• Loosen the shoulder belts by activating the adjustment
handle on the central adjuster and simultaneously
pulling both shoulder belts upwards.
• Open the belt buckle by pressing  rmly on the red
button.
ADJUSTING THE HEADREST
SECURING BY MEANS OF HARNESS SYSTEM
NOTE! Only when adjusted to the most suitable height
does the headrest offer your child the highest degree of
protection and safety. The height of the headrest can be
adjusted to eight different positions.
NOTE! Make sure that the child seat is free of toys and
hard objects.
The shoulder belts are  rmly attached to the headrest
and must not be adjusted separately. Make sure that the
headrest is correctly locked in place before you use the
seat.

CYBEX ATON 3S Specifications

General

Product color	Charcoal
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable headrest	Yes

Weight and Dimensions

Depth	639 mm
Width	515 mm
Height	558 mm
Weight	4800 g