EasyManua.ls Logo

CYBEX ATON 3S - Removing the Car Seat; Note: LSP Device Handling; Warning: LSP Device Use

CYBEX ATON 3S
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Listen for an audible CLICK, when it locks
NOTE: When using the ATON 3S on a middle position in
the vehicle, it’s prohibited to fold out the (LSP) device.
WARNING! Using the (LSP) device to carry or to
fasten the ATON 3S is prohibited.
Take the seat belt out of the blue belt slot n in the back.
Open the car buckle q and take the lap belt k out of the
blue belt slots m.
Lift up the linear-side.impact protection (LSP) device to
improve side protection during a side collision.
NOTE: It is not allowed to lift up the side protector (LSP)
on the side turned away from the vehicle door.
REMOVING THE CAR SEAT
NOTE: Before removing the ATON 3S from the vehicle,
fold the (LSP) devices back into place. This protects the
(LSP) device and the vehicle itself from damage.
By pressing the locking device f, you can fold the device
(LSP) downwards into the original position.

Related product manuals