CYBEX ATON 3S User Manual

22
WARNING! In some cases the buckle q of the car
safety belt may be too long and reach into the belt
slots of the CYBEX ATON 3S, making it dif cult
to install the ATON 3S securely. If this is the case
please choose another position in the car.
• Insert the lap belt k into the blue belt guides m on both
sides of the car seat.
• Pull the diagonal belt l in driving direction to tighten the
lap belt k.
• Pull the diagonal belt l behind the top end of the baby
seat.
• Bring the diagonal belt l into the blue belt slot n on the
back.
• Tighten the diagonal belt l.
NOTE! Do not twist the car belt.
WARNING! The seat belt must run through the blue
belt routing and below the unfolded Linear Side-impact
Protection.

CYBEX ATON 3S Specifications

General

Product color	Charcoal
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable headrest	Yes

Weight and Dimensions

Depth	639 mm
Width	515 mm
Height	558 mm
Weight	4800 g