CYBEX Bravo 8800 - Bars and Handles; Inspect Other Items

The following conditions may indicate a worn cable:
DiagramCondition of Cable
A tear or crack in the cable
sheath that exposes the
cable
A kink in the cable
A curled sheath
Necking - A stretched
cable sheath
Bars and Handles
Inspect bars and handles for wear, paying particular attention to tab area connection points.
CAUTION: Worn handles
• Do not use handles if less then 1/8” of material remains on edge.
• Replace all worn handles immediately.
QtyDescriptionItem
1
Attachment hole (Straight
handle)
1
2Attachment hole (Lat bar)2
ActionInspection
Replace all worn handles immediately.
Inspect bars and handles for wear, paying particular attention to
tab area connection points.
Replace all worn snap links immediately.Inspect snap links for proper latching (indicates wear).
Inspect Other Items
Inspect other items for proper operation, damage, or wear.
ActionInspection
Replace all loose or worn grips immediately.Inspect grips for looseness or wear.
Replace all worn labeling immediately.
Inspect all labeling for readability, including instructional placards,
warning and caution decals.
Correct all improper alignment and operation issues immediately.Inspect all weight stacks for proper alignment and operation.
Wipe Weight Stack Guide Rods clean over entire length. Lubricate
with a light coat of medium weight automotive engine oil.
Inspect guide rods for lubrication.
Page 22 of 27